Removing and disassembling the cooling fan unit, Yea_ tmon- ly yea_tmon, 4 drive cooling fans and circulation fans – Yaskawa L1000E AC Drive Technical Manual for CIMR-LE Models for Elevator Applications User Manual

Page 324

Advertising
background image

7.4 Drive Cooling Fans and Circulation Fans

324

YASKAWA ELECTRIC SIEP YAIL1E 01A YASKAWA AC Drive L1000E Technical Manual

Cooling Fan Replacement: 2A0181 to 2A0432, 4A0140 to 4A0260

WARNING! Electrical Shock Hazard. Do not connect or disconnect wiring while the power is on. Failure to comply can result in serious

personal injury. Before servicing the drive, disconnect all power to the equipment. The internal capacitor remains charged even after

the power supply is turned off. After shutting off the power, wait for at least the amount of time specified on the drive before touching

any components.

CAUTION! Burn Hazard. Do not touch a hot drive heatsink. Failure to comply could result in minor or moderate injury. Shut off the

power to the drive when replacing the cooling fan. To prevent burns, wait at least 15 minutes and ensure the heatsink has cooled down.

NOTICE: Equipment Hazard. Follow cooling fan replacement instructions. The cooling fan cannot operate properly when it is installed

incorrectly and could seriously damage the drive. Follow the instructions in this manual to replace the cooling fan, making sure that the

label is on top before inserting the cooling fan into the drive. To ensure maximum useful product life, replace both cooling fans when

performing maintenance.

Removing and Disassembling the Cooling Fan Unit

1.

Remove the terminal cover and front cover.

2.

Remove the fan connector (CN6). Remove the fan connectors (CN6, CN7) in model 2A0432.

Figure 7.19

Figure 7.19 Cooling Fan Replacement: Fan Unit and Connectors

3.

Remove the screws holding the fan unit in place and slide the fan unit out of the drive.

Figure 7.20

Figure 7.20 Removing the Fan Unit: 2A0181 to 2A0432, and 4A0140 to 4A0260

A – Fan Unit

D – Circulation Fan Relay Cable

B – Fan Relay Cable

E – Fan Connector (CN7)

C – Fan Connector (CN6)

A

B

C

2A0181, 2A0225, 2A0269, 2A0354

4A0140, 4A0188, 4A0225

A

C

2A0432

4A0260

A

B

D

E

C

B

YEA_

TMon-

ly

YEA_TMon

Advertising