ProSoft Technology 5201-DFNT-104S - Manual (Page 38)

104S v2 ♦ ProLinx Gateway Configure the Gateway
(Firmware v2.xx) Protocol Manual
Page 38 of 157
ProSoft Technology, Inc.
2.2 CommonNet Data Map
The [D ATA M AP ] section allows you to copy data between areas in the gateway's
internal database.
You can copy a maximum of 100 registers per Data Map command, and you can
configure a maximum of 200 separate copy commands.
For example, you can copy data from the error or status tables in upper memory
to internal database registers in the User Data memory area.
You can also rearrange the byte and/or word order during the copy process, for
example, to convert floating-point values to the correct format for a different
protocol.
You can also use the Data Map to condense widely dispersed data into one
contiguous data block, making it easier to access.
March 19, 2010