ProSoft Technology 5201-DFNT-104S - Manual (Page 70)

104S v2 ♦ ProLinx Gateway IEC-60870-5-104 (104S) Protocol Implementation
(Firmware v2.xx) Protocol Manual
Page 70 of 157
ProSoft Technology, Inc.
3.5 Data Communication
3.5.1 Group Communication
As previously discussed, the Group parameter in the gateway configuration file
controls how each monitored point is transferred between the 104S v2 gateway
and the client unit. The Group parameter is described in detail in Group Codes
(page 36)
The following example configures this point to be repeated either during cyclic
polls, or when a General Interrogation request for Group 1 occurs.
March 19, 2010