ProSoft Technology 5201-DFNT-104S - Manual (Page 95)

Diagnostics and Troubleshooting 104S v2 ♦ ProLinx Gateway
Protocol Manual (Firmware v2.xx)
ProSoft Technology, Inc.
Page 95 of 157
Opening the IEC-870-5-104 Server Menu
Press [I] to open the IEC-870-5-104 Server Menu. Use this command to view all
data associated with the IEC-870-5-104 server driver.
Viewing SNTP Status
Press [N] to view configuration information about the SNTP client.
Refer to SNTP Support for more information on configuring and using this
function.
Receiving the Configuration File
Press [R] to download (receive) the current configuration file from the gateway.
For more information on receiving and sending configuration files, please see
Uploading and Downloading the Configuration File (page 41).
Sending the Configuration File
Press [S] to upload (send) a configuration file from the gateway to your PC. For
more information on receiving and sending configuration files, please see
Uploading and Downloading the Configuration File (page 41).
Viewing Version Information
Press [V] to view Version information for the gateway.
Use this command to view the current version of the software for the gateway, as
well as other important values. You may be asked to provide this information
when calling for technical support on the product.
Values at the bottom of the display are important in determining gateway
operation. The Program Scan Counter value is incremented each time a
gateway’s program cycle is complete.
Tip: Repeat this command at one-second intervals to determine the frequency of program
execution.
March 19, 2010