ProSoft Technology 5201-DFNT-104S - Manual (Page 63)

IEC-60870-5-104 (104S) Protocol Implementation 104S v2 ♦ ProLinx Gateway
Protocol Manual (Firmware v2.xx)
ProSoft Technology, Inc.
Page 63 of 157
Example (C_SC_NA)
In the example above, each time the gateway receives a command for single-
command point 700, it sends a response containing a monitored single-point
(information object address 100 with the value at database bit-address 1600).
Require Select: This parameter configures the point to require a Select request
before the Operate command.
March 19, 2010