Roland V-8HD HDMI Video Switcher and UVC-01 USB Capture Device Kit - Manual (Page 10)

10
Video Input/Output Settings
Changing Video Bus Assignments
The V-8HD has four internal video buses (PROGRAM, PREVIEW, AUX,
and MULTI-VIEW).
You can select which buses to output via the OUTPUT 1–3 connectors.
1 . Press the [MENU] button 0 ”VIDEO OUTPUT” 0
select one of “OUTPUT 1” to “OUTPUT 3”, and press
the [VALUE] knob.
A menu for the selected output video appears.
2 . Use the [VALUE] knob to select “OUTPUT ASSIGN”,
and press the [VALUE] knob.
3 . Use the [VALUE] knob to select the video bus, and
press the [VALUE] knob.
* If a connector other than the OUTPUT 3 connector is set to “MULTI-
VIEW”, the audio meter, label, and menu etc. are not shown.
4 . Press the [MENU] button to quit the menu.
MEMO
5 By holding down the [EXIT] button and pressing the
[TRANSITION] button, you can switch the video bus that assign
to OUTPUT 3 connector.
5 For details about video transitions on the A/PGM bus and B/PST
bus, refer to “Switching the Video” (p. 11).
5 For details about video transitions on the AUX bus, refer to
“Switching AUX Output” (p. 16).
About audio outputs assigned to video buses
Changing an video bus assignment makes the output audio also
change in tandem, according to the assigned bus.
Video bus assignment Output audio
PROGRAM
PREVIEW
MULTI-VIEW
Outputs the audio of the MASTER OUTPUT bus.
AUX Outputs the audio of the AUX bus.
You can also fix the output audio to the MASTER OUTPUT bus or AUX
bus regardless of the video bus assignment (p. 38).
Inputting Copy-Protected (HDCP) Video
If you want to input HDCP-protected video from a BD player or other
device, you can enable HDCP input.
* If you want to output HDCP-protected video, connect an HDCP-
capable display.
What’s HDCP?
HDCP is copyright-protection technology that prevents unlawful
copying of content by encoding the path when sending digital signals
from a video playback device to a display monitor or other display
equipment.
1 . Press the [MENU] button 0 ”SYSTEM” 0 select
“HDCP”, and press the [VALUE] knob.
2 . Use the [VALUE] knob to select “ON”, and press the
[VALUE] knob.
Value Explanation
ON
HDCP-protected video can be input.
HDCP is applied to the output video.
OFF HDCP-protected video cannot be input.
4 . Press the [MENU] button to quit the menu.