Roland V-8HD HDMI Video Switcher and UVC-01 USB Capture Device Kit - Manual (Page 80)

80
Menu List
FUNCTION EDIT
Menu item Value
(Bold: default)
Explanation
FUNCTION
PGM TAKE
PGM/PST SELECT
AUX SELECT
INPUT ASSIGN
TRANSITION TIME
TRANSITION TYPE
PinP ON/OFF
PinP SOURCE
PinP WINDOW
DSK ON/OFF
DSK SOURCE
SPLIT/VFX ON/OFF SPLIT/VFX TYPE
SPLIT POSITION
AUDIO INPUT LEVEL
AUDIO INPUT MUTE
AUDIO OUTPUT LEVEL
AUDIO OUTPUT MUTE
PRESET MEMORY
MACRO
OUTPUT FADE
REC CONTROL
WAIT
Sets the operation to record to the macro.
* The related menu is shown according to the operation you set.
WAIT:
Sets the waiting time before the next operation is executed.
TIMING
Sets the timing of the operation to execute.
AFTER PREVIOUS
The function is executed after the preceding one. The next sequential
list number is used.
SAME AS PREVIOUS
Executes the operation at the same time as the preceding one. The same
list number as the previous operation is used.
MOVE THIS FUNCTION ENTER Moves the operation being edited and resorts the list.
COPY THIS FUNCTION ENTER Copies the operation being edited into a position in the list you desire.
DELETE THIS FUNCTION EXEC Deletes the operation being edited.
13: SEQUENCER
Menu item Value
(Bold: default)
Explanation
SEQUENCER OFF , ON Turns the sequencer function on/off.
REPEAT EXECUTE OFF , ON When this is “ON”, the recorded operation is repeatedly executed.
AUTO SEQUENCE OFF , ON
Turns the auto sequence function on/off.
* This is valid when “SEQUENCER ” is set to “ON”.
LIST EDIT
ENTER
Shows a list of operations recorded in the sequencer.
Select an operation or “ADD NEW FUNCTION” and press the [VALUE] knob to show the
following FUNCTION EDIT menu, where you can edit the operation.
Menu item Value Explanation
FUNCTION
Sets the operation to record to the sequencer.
The related menu is shown according to the operation you set.
PGM TAKE
Switches the final output video.
PRESET MEMORY Recalls a preset memory.
MACRO Executes a macro (a series of recorded operations).
NAME — Shows the name of the operation.
EDIT
Sets how naming is done.
AUTO Names are automatically given.
CUSTOM
Names can be assigned as you like.
Press the [VALUE] knob to access the screen for editing the name.
AUTO SEQUENCE
Sets the operation when auto sequence is on.
PAUSE
Pauses the auto sequence.
AUTO Executes the next operation in the sequence.
1– 5 –120sec Executes the next operation after delaying for a specified amount of time.
MOVE THIS FUNCTION ENTER Moves the operation being edited and resorts the list.
COPY THIS FUNCTION ENTER Copies the operation being edited into a position in the list you desire.
DELETE THIS FUNCTION ENTER Deletes the operation being edited.
INITIALIZE EXEC Initializes the sequencer.
LOAD FROM USB MEMORY ENTER
Shows a list of the sequence files (.SEQ) that are on the USB flash drive.
You can select a sequence file to load the sequencer settings into this unit. The current
sequencer settings are overwritten.
SAVE TO USB MEMORY ENTER
Shows a list of the sequence files (.SEQ) that are on the USB flash drive.
You can select a sequence file to overwrite the current sequencer settings. If you selected
“NEW FILE...”, a new sequence file is saved.