Roland V-8HD HDMI Video Switcher and UVC-01 USB Capture Device Kit - Manual (Page 41)

41
Other Features
Saving to a Preset Memory
Preset memory 1–8
1 . Use the [MODE] button to select “MEMORY”.
2 . Long-press the MEMORY button for the number
where you want to save the settings.
All of the MEMORY [1]–[8] buttons are briefly illuminated in light
blue, and the current settings are saved in the selected preset
memory.
Preset memory 9–24
1 . Press the [MENU] button and select the memory
number from “PRESET MEMORY” 0 “SAVE”, and
press the [VALUE] knob.
MEMO
5 If you change [MENU] button 0 “PRESET MEMORY” 0
“NUMBER OF MEMORY SW “from 8 to 24, the A [1]–[8] buttons
and B [1]–[8] buttons operate respectively as MEMORY 9–16
buttons and MEMORY 17–24 buttons when MODE is MEMORY.
5 You can prohibit settings from being saved or initialized
(p. 42) to protect the preset memories.
Use the [MENU] button
0 “PRESET MEMORY” 0 and set
“MEMORY PROTECT” to “ON”.
5 Since settings related to the system, freeze and so on are
common to the entire unit, they are not saved in a memory.
For details, refer to “SAVE” in “11: PRESET MEMORY” (p. 78).
Recalling a Preset Memory
Preset memory 1–8
1 . Use the [MODE] button to select “MEMORY”.
MEMORY [1]–[8] button illumination color
Light blue
Currently selected memory
Blue Memories in which data is saved
Unlit Memories with no data (empty)
2 . Press the MEMORY button for the number whose
setting you want to recall.
The settings are recalled.
Preset memory 9–24
1 . Press the [MENU] button and select the memory
number from “PRESET MEMORY” 0 “LOAD”, and
press the [VALUE] knob.
MEMO
When recalling a preset memory, you can specify the individual
menu items that will be included in the recalled preset memory.
To make this setting, use the [MENU] button
0 “PRESET MEMORY”
0 “LOAD PARAMETER”.
Saving/Recalling Settings (Preset Memory)
You can save the current settings, including the video/audio settings and the state of the operating panel, in preset memory and recall those
settings for use when necessary. The V-8HD is provided with 24 preset memories.
* The settings are saved in preset memory as demo data by factory default.
About the last memory function
The V-8HD has a built-in Last Memory function. Last Memory is a function that saves the state of the unit that is in effect immediately before power-
down, and automatically restores the state at the next startup. The Last Memory function is enabled by default. If you want the unit to recall a specific
preset memory when it starts up, use the PRESET MEMORY menu item “START UP” to specify the preset memory number.