Roland V-8HD HDMI Video Switcher and UVC-01 USB Capture Device Kit - Manual (Page 52)

52
Other Features
Loading
Here’s how to load the macro settings that are saved on a USB flash
drive. Loading the settings overwrites the current settings for the
macros (1–100).
1 . Press the [MENU] button 0 “MACRO” 0 select “LOAD
FROM USB MEMORY”, and press the [VALUE] knob.
The macro setting files in the USB flash drive are listed.
2 . Use the [VALUE] knob to select the macro settings
file that you want to load, and press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
3 . Use the [VALUE] knob to select “YES”, and press the
[VALUE] knob.
The macro settings are loaded. When the operation is finished, the
message “COMPLETE” appears.
4 . Press the [MENU] button to close the menu.