Roland V-8HD HDMI Video Switcher and UVC-01 USB Capture Device Kit - Manual (Page 38)

38
Audio Operations
Outputting AUX-bus Audio
The V-8HD has two types audio buses: MASTER OUTPUT and AUX. You can assign a desired bus to each output connector.
Audio bus Explanation
MASTER
OUTPUT
All input audio is mixed and output (master output).
AUX
This mixes and outputs only the input audio that is sent
to the AUX bus. This allows you to output audio that is
different than the master output.
For example, in a live event, you might output a mix of
all audio inputs, while separately outputting a mix of
only specific audio inputs (the AUX bus) for recording or
streaming.
Assigning the AUX Bus
1 . Press the [MENU] button 0 ” AUDIO OUTPUT” 0
“ OUTPUT ASSIGN” 0 slect the output jack, and
press the [VALUE] knob.
2 . Use the [VALUE] knob to select “AUX” or “AUTO”, and
press the [VALUE] knob.
Value Explanation
AUTO (*1)
The audio bus automatically switches according to
the video bus assignment (p. 10).
Video bus Audio bus
Others besides AUX MASTER OUTPUT
AUX AUX
MASTER
OUTPUT
Output the audio of the MASTER OUTPUT bus.
AUX Output the audio of the AUX bus.
(*1) For “HDMI OUTPUT 1”–”HDMI OUTPUT 3” only.
3 . Press the [MENU] button to quit the menu.
Sending Audio to the AUX Bus
1 . Press the [MENU] button 0 ”AUDIO OUTPUT” 0 ”AUX”
0 select “AUX SEND”, and press the [VALUE] knob.
The AUX SEND menu appears.
2 . Use the [VALUE] knob to select the input audio, and
press the [VALUE] knob.
* You can select HDMI IN 1–8 by setting “AUX SEND VIDEO” to
“MANUAL”.
When this is set to “AUTO”, the audio is automatically sent to the
AUX bus in tandem with the AUX bus video selection.
3 . Use the [VALUE] knob to adjust the amount that is
sent to the AUX bus, and press the [VALUE] knob.
4 . Press the [MENU] button to quit the menu.
Setting the character of the sound
You can select whether to send either the original audio or the audio
processed with effects to the AUX bus.
1 . Press the [MENU] button 0 ”AUDIO OUTPUT” 0 ”AUX”
0 select “AUX EFFECT” and press the [VALUE] knob.
The AUX EFFECT menu appears.
2 . Use the [VALUE] knob to select the input audio, and
press the [VALUE] knob.
3 . Use the [VALUE] knob to select “DRY”, “PRE FADE”, or
“POST FADER”, and press the [VALUE] knob.
Value Explanation
DRY Sends the source audio with no effects applied.
PRE FADER
Sends the effect-applied audio.
The send volume is constant, regardless of the volume
(INPUT LEVEL).
POST
FADER
Sends the effect-applied audio.
The send volume can be changed by adjusting the
volume (INPUT LEVEL).
4 . Press the [MENU] button to quit the menu.