Roland V-8HD HDMI Video Switcher and UVC-01 USB Capture Device Kit - Manual (Page 81)

81
Menu List
14: STILL IMAGE
Menu item Value
(Bold: default)
Explanation
LOAD FROM USB MEMORY STILL 1 –8
Loads a still image from a USB flash drive and saves it in this unit.
Specifies the save-destination for the still image that is loaded from the USB flash drive.
If a still image is already saved, an “ ” is shown.
When you press the [VALUE] knob, a list of the still images on the USB flash drive is shown.
Select the still image that you want to load, and press the [VALUE] knob to save the still
image in this unit.
SAVE TO USB MEMORY STILL 1 –8
Saves a still image captured from the input video to a USB flash drive.
Select the still image memory (“STILL 1”–”STILL 8”) that you want to save.
Memories in which a still image is saved are indicated by a “*” symbol.
Select the FILE TYPE (file format), and enter a file name.
Select “SAVE”, and then press the [VALUE] knob to save the still image to the USB flash drive.
* An image captured while HDCP is ON cannot be saved.
SAVE TO INTERNAL STORAGE
Use this to set whether to save still images you’ve captured or loaded to this unit’s internal memory.
DISABLE
Temporarily saves still images to internal memory. This lets you capture images while the
audio is still playing.
* When you turn off the power, the still image is deleted.
ENABLE
Saves still images to internal memory.
* All audio stops during still-image capture.
DELETE STILL IMAGE ALL, STILL 1 –8
Selects the still images to delete.
Press the [VALUE] knob to delete the still images.
15: FREEZE
Menu item Value
(Bold: default)
Explanation
FREEZE OFF , ON
Turns the freeze function on/off. If this is “ON”, the input video is temporarily frozen.
If “FREEZE” is assigned to the USER [1] or [2] button, you can also switch this by pressing
the button.
TYPE
Specifies the type of freeze function.
ALL Freezes all video that is being input.
SELECT Freezes only the specified input video.
HDMI IN 1–8 ENABLE , DISABLE
For each input, specifies whether the freeze function is enabled (ENABLE) or disabled
(DISABLE).
* This is shown if TYPE is “SELECT”.