Roland V-8HD HDMI Video Switcher and UVC-01 USB Capture Device Kit - Manual (Page 56)

56
Other Features
Making the Sequencer Run Automatically (Auto Sequence)
Use the auto sequence feature when you want to make the functions recorded in the sequencer execute automatically.
Configuring the auto sequence settings
Set the action or function that’s executed when the sequencer
advances to the next function. You can add some delay time before
the next function is executed, or pause the execution of a function.
1 . Press the [MENU] button 0 “SEQUENCER” 0 select
“LIST EDIT”, and press the [VALUE] knob.
The list of operations recorded in the sequencer is shown.
2 . Select the function in the list, and press the [VALUE]
knob.
The FUNCTION EDIT menu appears.
3 . Use the [VALUE] knob to select “AUTO SEQUENCE”,
and press the [VALUE] knob.
4 . Use the [VALUE] knob to set the action that’s
executed when the sequencer advances to the next
function, and then press the [VALUE] knob.
Value Explanation
PAUSE Pauses the auto sequence.
AUTO Executes the next operation in the sequence.
1–120sec
Executes the next operation after delaying for a specified
amount of time.
5 . Press the [MENU] button to close the menu.
Running the auto sequence
1 . Use the [MENU] button 0 “SEQUENCER” 0 and set
“SEQUENCER” to “ON”.
The sequencer function turns on.
2 . Use the [VALUE] knob to select “AUTO SEQUENCE”,
and set it to “ON”.
The auto sequence turns on, and the functions in the list are
executed, starting at the beginning. The [AUTO] button blinks
while a function is executing.
When the last function is finished, the sequence stops
automatically.
When a function is set to “PAUSE”
When the function is finished, auto sequence is paused. You can
press the [AUTO] button to manually execute the next function.
* When executing a function that’s set to a value other than “PAUSE”,
the auto sequence is resumed.
3 . To turn the auto sequence off, set “AUTO SEQUENCE”
to “OFF”.
4 . Press the [MENU] button to close the menu.
MEMO
5 You can repeatedly execute functions that are in a list. When
the last function is finished, the sequencer returns to the
beginning.
Use the [MENU] button
0 “SEQUENCER” 0 and set “REPEAT
EXECUTE” to “ON”.
5 The list of operations recorded in the sequencer are shown
when you turn the auto sequence (mentioned in step 2) on and
close the menu. This lets you check which action is executed
when the sequencer moves to the next function.
When the action is set to
“PAUSE”, this is blank.
5 You can assign the function to a USER button and turn auto
sequence on/off (p. 63).