Roland V-8HD HDMI Video Switcher and UVC-01 USB Capture Device Kit - Manual (Page 45)

45
Other Features
Loading
Here’s how to load the preset memory settings that are saved on
a USB flash drive. Doing this overwrites the preset memory (1–24)
settings.
1 . Press the [MENU] button 0 “PRESET MEMORY” 0
select “LOAD FROM USB MEMORY”, and press the
[VALUE] knob.
The preset files on the USB flash drive are shown as a list.
2 . Use the [VALUE] knob to select the macro settings
file that you want to load, and press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
3 . Use the [VALUE] knob to select “YES”, and press the
[VALUE] knob.
The preset memory is recalled. When the operation is finished, the
message “COMPLETE” appears.
4 . Press the [MENU] button to close the menu.