Roland V-8HD HDMI Video Switcher and UVC-01 USB Capture Device Kit - Manual (Page 76)

76
Menu List
Menu item Value
(Bold: default)
Explanation
Mid FREQUENCY 20.0– 500Hz –20.0kHz Specifies the center frequency when changing the tone in the middle band.
Mid Q 0.5– 1.0 –16.0 Adjusts the width of the frequency band when boosting or attenuating the middle band.
Lo GAIN -15.0– 0.0 –15.0dB Boosts or attenuates the low band.
Lo FREQUENCY 20.0– 500Hz –20.0kHz Specifies the center frequency when changing the tone in the low band.
9: AUDIO OUTPUT
OUTPUT ASSIGN
Menu item Value
(Bold: default)
Explanation
AUDIO OUT MASTER OUTPUT , AUX
Specifies the audio bus that is assigned to each connector.
MASTER OUTPUT:
All input audio is mixed and output (master output).
AUX:
Only the input audio sent to the AUX bus is mixed and output. This allows you to
output audio that is different than the master output.
AUTO:
The audio bus automatically switches according to the video bus assignment.
Video bus Audio bus
Others besides AUX MASTER OUTPUT
AUX AUX
PHONES OUT MASTER OUTPUT , AUX
HDMI OUTPUT 1–3 AUTO , MASTER OUTPUT, AUX
MASTER OUTPUT
Menu item Value
(Bold: default) Explanation
OUTPUT LEVEL -INF– 0.0 –10.0dB Adjusts the output volume.
OUTPUT MUTE OFF , ON
Turns the mute function on/off.
If this is “ON”, the output audio is temporarily silenced.
LIMITER OFF , ON
Turns the limiter on or off.
Effect This limits the output volume so that is does not exceed the set level.
THRESHOLD -40.0– -6.0 –0.0db
Adjusts the level that becomes the threshold at which the limiter is applied.
Compression is applied to audio that exceeds the threshold. The volume level of
audio that is output is limited so as to stay to below the threshold.
EQUALIZER OFF , ON
Turns the equalizer on/off.
Effect Adjusts the tone for each frequency band.
Hi GAIN -15.0– 0.0 –15.0dB Boosts or attenuates the high band.
Hi FREQUENCY 1.0– 10.0 –20.0kHz Specifies the center frequency when changing the tone in the high band.
Mid GAIN -15.0– 0.0 –15.0dB Boosts or attenuates the middle band.
Mid FREQUENCY 20.0– 500Hz –20.0kHz Specifies the center frequency when changing the tone in the middle band.
Mid Q 0.5– 1.0 –16.0 Adjusts the width of the frequency band when boosting or attenuating the middle band.
Lo GAIN -15.0– 0.0 –15.0dB Boosts or attenuates the low band.
Lo FREQUENCY 20.0– 500Hz –20.0kHz Specifies the center frequency when changing the tone in the low band.
MULTI BAND
COMPRESSOR
OFF , ON
Turns the multi-band compressor on/off.
Effect Applies separate compressors in individual frequency band.
Hi THRESHOLD -40.0– -20.0 –0.0dB
Specifies the threshold level at which the compressor is applied to the high band.
Compression is applied to audio that exceeds the threshold.
Hi RATIO
1.00: 1, 1.12: 1, 1.25: 1, 1.40: 1,
1.60: 1, 1.80: 1, 2.00: 1, 2.50: 1,
3.20 : 1 , 4.00: 1, 5.60: 1, 8.00: 1,
16.0: 1, INF: 1
Specifies the amount of compression applied in the high band.
The state in which no compression is applied is defined as “1”.
Mid THRESHOLD -40.0– -16.0 –0.0dB
Specifies the threshold level at which the compressor is applied to the middle band.
Compression is applied to audio that exceeds the threshold.