Saving, Other features, Saving a new file – Roland V-8HD HDMI Video Switcher and UVC-01 USB Capture Device Kit User Manual
Page 44: Overwrite-saving a file
44
Other Features
Saving Preset Memories to a USB Flash Drive
You can group together the preset memories (1–24) into a single file (.V08preset) and save this to a USB flash drive connected to the USB MEMORY
port. You can access saved preset files on the USB flash drive and load them into the unit to use as needed.
NOTE
5
When using a USB flash drive for the first time, you must
format it using the V-8HD (p. 60).
5
Depending on the USB flash drive, recognition of the flash
drive might take some time.
Saving
Saving a new file
1 .
Connect the USB flash drive to the USB MEMORY
port.
2 .
Press the [MENU] button
0
“PRESET MEMORY”
0
select “SAVE TO USB MEMORY”, and press the
[VALUE] knob.
The preset files on the USB flash drive are shown as a list.
3 .
Use the [VALUE] knob to select “NEW FILE...”, and
press the [VALUE] knob.
4 .
Enter the file name.
* You can enter a text string of up to 16 characters in length.
1
Use the [VALUE] knob to move the cursor.
Pressing the [EXIT] button deletes the character at the cursor
location.
2
Press the [VALUE] knob to highlight the character at the cursor
location.
3
Use the [VALUE] knob to change the character, and then press
the [VALUE] knob.
5 .
When you finish entering the name, use the [VALUE]
knob to select “SAVE”, and press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
6 .
Use the [VALUE] knob to select “YES”, and press the
[VALUE] knob.
This saves the preset file (.V08preset) to the USB flash drive. When
the operation is finished, the message “COMPLETE” appears.
7 .
Press the [MENU] button to close the menu.
Overwrite-saving a file
1 .
Connect the USB flash drive to the USB MEMORY
port.
2 .
Press the [MENU] button
0
“PRESET MEMORY”
0
select “SAVE TO USB MEMORY”, and press the
[VALUE] knob.
The preset files on the USB flash drive are shown as a list.
3 .
Use the [VALUE] knob select the preset file that you
want to overwrite, and press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
4 .
Use the [VALUE] knob to select “YES”, and press the
[VALUE] knob.
The preset file is overwritten. When the operation is finished, the
message “COMPLETE” appears.
5 .
Press the [MENU] button to close the menu.