Roland V-8HD HDMI Video Switcher and UVC-01 USB Capture Device Kit - Manual (Page 66)

66
Menu List
Menu item Value
(Bold: default)
Explanation
SCALING TYPE
Specifies the scaling type.
FULL
Always displays the picture expanded to full screen, irrespective of the aspect ratio of
the input video.
LETTERBOX
Enlarges or reduces the incoming video to a full-screen view while keeping the aspect
ratio unchanged.
CROP
Enlarges or reduces the incoming video so that the output picture has no blank margins
while keeping the aspect ratio unchanged. Video extending beyond the borders is cut off.
DOT BY DOT Performs no scaling.
MANUAL Scale according to the “MANUAL SIZE H” and “MANUAL SIZE V” settings below.
MANUAL SIZE H (*2) -2000– 0 –2000 (*1) Adjusts the horizontal size.
MANUAL SIZE V (*2) -2000– 0 –2000 (*1) Adjusts the vertical size.
POSITION H -1920– 0 –1920 Adjusts the display position in the horizontal direction.
POSITION V -1920– 0 –1920 Adjusts the display position in the vertical direction.
BRIGHTNESS -32– 0 –31 Adjusts the brightness.
CONTRAST -32– 0 –31 Adjusts the contrast.
SATURATION -32– 0 –31 Adjusts the saturation.
RED -64– 0 –63 Adjusts the red level.
GREEN -64– 0 –63 Adjusts the green level.
BLUE -64– 0 –63 Adjusts the blue level.
(*1) The valid range of setting values depends on conditions such as the input/output format.
(*2) This is valid when “SCALING TYPE” is set to “MANUAL”.
2: VIDEO OUTPUT
OUTPUT 1–3
Menu item Value (Bold: default) Explanation
OUTPUT STATUS —
Displays information about the output connector.
When there’s no connection, “NOT CONNECTED” is displayed.
OUTPUT ASSIGN
Specifies the video bus that is assigned to the OUTPUT connector.
PROGRAM
Outputs the program video.
Default
OUTPUT 1: PROGRAM
OUTPUT 2: PREVIEW
OUTPUT 3: MULTI-VIEW PREVIEW Outputs the preview video (standby video).
AUX Outputs the AUX bus.
MULTI-VIEW Outputs the multi-view monitor.
COLOR SPACE
YPbPr 4:4:4 , RGB (0–255),
RGB (16–235), YPbPr 4:2:2
Specifies the color space.
DVI-D/HDMI SIGNAL HDMI , DVI-D Specifies the output mode for HDMI output.
BRIGHTNESS -64– 0 –63 Adjusts the brightness.
CONTRAST -64– 0 –63 Adjusts the contrast.
SATURATION -64– 0 –63 Adjusts the saturation.
RED -64– 0 –63 Adjusts the red level.
GREEN -64– 0 –63 Adjusts the green level.
BLUE -64– 0 –63 Adjusts the blue level.
REC CONTROL OFF, ON
Specifies whether video record start/stop on a recorder equipped with the HDMI REC
TRIGGER function will (ON) or will not (OFF) be controlled from the V-8HD.