Saving/loading the sequencer settings, Saving, Other features – Roland V-8HD HDMI Video Switcher and UVC-01 USB Capture Device Kit User Manual
Page 57: Saving a new file, Overwrite-saving
57
Other Features
NOTE
5
When using a USB flash drive for the first time, you must
format it using the V-8HD (p. 60).
5
Depending on the USB flash drive, recognition of the flash
drive might take some time.
Saving
Saving a new file
1 .
Connect the USB flash drive to the USB MEMORY
port.
2 .
Press the [MENU] button
0
“SEQUENCER”
0
select
“SAVE TO USB MEMORY”, and press the [VALUE] knob.
The sequence files in the USB flash drive are listed.
3 .
Use the [VALUE] knob to select “NEW FILE...”, and
press the [VALUE] knob.
4 .
Enter the file name.
* You can enter a text string of up to 16 characters in length.
1
Use the [VALUE] knob to move the cursor.
Pressing the [EXIT] button deletes the character at the cursor
location.
2
Press the [VALUE] knob to highlight the character at the cursor
location.
3
Use the [VALUE] knob to change the character, and then press
the [VALUE] knob.
5 .
When you finish entering the name, use the
[VALUE] knob to select “SAVE”, and press the
[VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
6 .
Use the [VALUE] knob to select “YES”, and press the
[VALUE] knob.
The sequence file (.RSQ) is saved to the USB flash drive. When the
operation is finished, the message “COMPLETE” appears.
7 .
Press the [MENU] button to close the menu.
Overwrite-saving
1 .
Connect the USB flash drive to the USB MEMORY
port.
2 .
Press the [MENU] button
0
“SEQUENCER”
0
select
“SAVE TO USB MEMORY”, and press the [VALUE] knob.
The sequence files in the USB flash drive are listed.
3 .
Use the [VALUE] knob select the sequence file that
you want to overwrite, and press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
4 .
Use the [VALUE] knob to select “YES”, and press the
[VALUE] knob.
The sequence file is overwritten. When the operation is finished,
the message “COMPLETE” appears.
5 .
Press the [MENU] button to close the menu.
Saving/Loading the Sequencer Settings
You can save the sequencer settings as a single file (.RSQ) to a USB flash drive connected to the USB MEMORY port.
You can access the saved sequence file on the USB flash drive and load it into the unit for use when needed.