Roland V-8HD HDMI Video Switcher and UVC-01 USB Capture Device Kit - Manual (Page 77)

77
Menu List
Menu item Value
(Bold: default) Explanation
Mid RATIO
1.00: 1, 1.12: 1, 1.25: 1, 1.40: 1,
1.60: 1, 1.80: 1, 2.00: 1,
2.50 : 1 ,
3.20: 1, 4.00: 1, 5.60: 1, 8.00: 1,
16.0: 1, INF: 1
Specifies the amount of compression applied in the middle band.
The state in which no compression is applied is defined as “1”.
Lo THRESHOLD -40.0– -20.0 –0.0dB
Specifies the threshold level at which the compressor is applied to the low band.
Compression is applied to audio that exceeds the threshold.
Lo RATIO
1.00: 1, 1.12: 1, 1.25: 1, 1.40: 1,
1.60: 1, 1.80: 1, 2.00: 1, 2.50: 1,
3.20 : 1 , 4.00: 1, 5.60: 1, 8.00: 1,
16.0: 1, INF: 1
Specifies the amount of compression applied in the low band.
The state in which no compression is applied is defined as “1”.
AUX
Menu item Value
(Bold: default)
Explanation
AUX LEVEL -INF– 0.0 –10.0dB Adjusts the output volume of the AUX bus.
AUX MUTE OFF , ON
Turns the mute function on/off.
If this is “ON”, the output audio of the AUX bus is temporarily silenced.
DELAY
0.0 –500.0msec
( 0.0 –29.9/25.0frame)
Adjusts the delay time for output audio.
LIMITER OFF , ON
Turn the limiter on/off.
Effect This limits the output volume so that is does not exceed the set level.
THRESHOLD -40.0– -6.0 –0.0db
Adjusts the level that becomes the threshold at which the limiter is applied. Compression
is applied to audio that exceeds the threshold. The volume level of audio that is output is
limited so as to stay to below the threshold.
AUX SEND
ENTER Displays the following AUX SEND menu.
Menu item Value (Bold: default) Explanation
AUX SEND
VIDEO
Selects how to configure the amount of signal sent to the AUX bus for INPUT 1–8.
AUTO Audio is automatically sent to the AUX bus in tandem with the AUX bus video selection.
MANUAL The amount of audio to send is adjusted manually.
HDMI IN 1–8 -INF –0dB Adjusts the amount of audio sent to the AUX bus for each input.
* You can configure HDMI 1–8 when AUX SEND VIDEO is set to “MANUAL”.
AUDIO IN -INF –0dB
AUX EFFECT
ENTER Displays the following AUX EFFECT menu.
Menu item Value (Bold: default) Explanation
HDMI IN 1–8
AUDIO IN
Sets whether to send audio from each input to the AUX bus with effects applied or not.
DRY
Sends the source audio with no effects applied.
PRE FADER
Sends the effect-applied audio.
The send volume is constant, regardless of the volume (INPUT LEVEL).
POST FADER
Sends the effect-applied audio.
The send volume can be changed by adjusting the volume (INPUT LEVEL).
10: AUDIO FOLLOW
Menu item Value (Bold: default) Explanation
ALL AUDIO FOLLOW OFF , ON Turns on/off the audio follow function for INPUT 1–8 in a single action.
INPUT 1–8
Turns the audio follow function on/off.
Audio follow is a function that automatically switches the audio output in tandem with video switching.
OFF The audio is always output regardless of the video selection.
ON
The audio is output only when the video is selected. The audio is automatically muted if
another video is selected.
AUDIO IN OFF , INPUT 1–8
Specifies the input video (INPUT 1–8) that uses audio follow for the audio of AUDIO IN.
The audio of AUDIO IN is output only when the specified input video is selected.
If this is “OFF”, the audio of AUDIO IN is always output regardless of the input video
selection.