Roland V-8HD HDMI Video Switcher and UVC-01 USB Capture Device Kit - Manual (Page 32)

32
Video Operations
7 . When you finish entering the name, use the
[VALUE] knob to select “SAVE”, then press the
[VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
8 . Use the [VALUE] knob to select “YES”, then press the
[VALUE] knob.
The still image is written to the USB flash drive.
9 . Press the [MENU] button to quit the menu.
Overwrite-saving a still image file
1 . Connect the USB flash drive to the USB MEMORY
port.
2 . Select the [MENU] button 0 “STILL IMAGE” 0
“SAVE TO USB MEMORY”, and press the [VALUE] knob.
A “ ” symbol is displayed for
memory where a still image
is already saved.
3 . Use the [VALUE] knob to select the memory
(STILL 1–8) for the still image that you want to save,
and press the [VALUE] knob.
The SAVE STILL IMAGE screen appears.
4 . Use the [VALUE] knob select the file to overwrite,
and press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
* If you long-press the [VALUE] knob, the edit screen opens with the
file name and file format preserved.
5 . Press the [VALUE] knob.
The file (.V08) is newly saved on the USB flash drive.
6 . Press the [MENU] button to quit the menu.
Freezing Input Video (Freeze)
This temporarily pauses the incoming video.
You can apply transition effects and visual effects during a video
freeze.
Setting the freeze mode
There are two freeze modes: “ALL” and “SELECT”.
* With the factory settings, “ALL” is selected.
Mode Explanation
ALL Freezes all video that is being input.
SELECT Freezes only the specified input video.
1 . Press the [MENU] button 0 ”FREEZE” 0 select
“TYPE”, and press the [VALUE] knob.
2 . Use the [VALUE] knob to select “ALL” or “SELECT”,
and press the [VALUE] knob.
If “SELECT” is selected
3 . Use the [VALUE] knob to select “HDMI IN 1”–“HDMI
IN 8”, and press the [VALUE] knob.
4 . Use the [VALUE] knob to select “ENABLE” or
“DISABLE”, and press the [VALUE] knob.
Value Explanation
ENABLE The input video freezes.
DISABLE The input video does not freeze.
5 . Press the [MENU] button to quit the menu.