High End Systems High End LCD Controller for Studio Color - Manual (Page 117)

Studio Color LCD Controller Overview 5-3
5
• Help: On-screen help for all Main menu options.
• Backup: Options for transferring controller memory to
and from a RAM card and for backing up the controller’s
operating system to a RAM card. See Chapter 7.
• Submasters: Allow you to change color and dim
constructs remotely using a 0—10V analog controller.
See the section titled “Submasters” on page 6-23.
• Setup: Set the following options:
• Device-ID: Select the controller’s Device ID. See
the section titled “Selecting MSC or LSC” on page
5-8.
• Mem-Lock: Lock out memories to prevent
accidental reprogramming. See the section titled
“Locking/Unlocking Memory” on page 5-12.
• Serial Port: Set up the RS-232C serial
communication port for use with Lightwave Control
Center (LCC). See the section titled “Selecting MSC
or LSC” on page 5-8 and “Lightwave Control
Center” on page 6-31.
• Edit/Copy: Determines how the fixture (address)
parameter copy command works. See the section
titled “Address Parameter Copy” on page 6-5.
• Erase All: Quickly erase all memories, pages and
presets (except for locked memories). See the
section titled “Erasing All Memory” on page 5-14.
• Erase User (keys): Quickly erase any custom
definitions of the User keys and return them to their
default definitions. See the section titled “Erasing
All User Keys” on page 6-14.
• Function: Enables or disables the following advanced
programming functions (advanced programming is
covered in Chapter 6):
• Random advance
• Audio 1 advance, Audio 2 advance
• Color modulate
• Dim modulate