High End Systems High End LCD Controller for Studio Color - Manual (Page 171)

Studio Color LCD Controller RAM Card: O/S 7-9
7
4. Press the Cursor <Down> arrow key to view the menu options,
then select
/3; ,

, as shown below:
If the message
L-  /
 /3;M
does not appear on
the LCD display, see the explanation below:
• If there is no card in the RAM card slot, or if the RAM
card is not fully inserted, the message appears:
L
 

 
M
Fully insert a RAM card into the slot (but
do not force it into the slot—turn it over if you feel
resistance); the LCD display message changes to:
L- 
 /
 /3;M
• If the RAM card’s write-protect switch is turned on, the
message appears:
L
 ) M
You can unlock the
card without removing it from the controller. See the
section titled “RAM Card: Write-Protection” on page
7-12.
5. Press the <Record> key to replace the RAM card’s current
contents with the controller’s operating system (O/S).
6. After you press the <Record> key, the LCD display appears as
shown below:
7. Press the <Record> key to copy the controller’s operating
system (O/S) to the RAM card, or press the <Select> key to
cancel without copying.
8. After backing up the operating system, write-protect the
RAM card as shown in the section titled “RAM Card: Write-
Protection” on page 7-12.
 ,

 , /3; , 
-  /
 /3;
 ,

 , /3; , 
 N /A <;0 :A
)