High End Systems High End LCD Controller for Studio Color - Manual (Page 120)

5-6 Navigating the Menus Studio Color LCD Controller
below:
Pressing the Cursor <Down> arrow key again has no effect,
since there are no menu items below


, 
.
Pressing the Cursor <Right> and <Left> arrow keys select
different menu options on the same level, and pressing the
Cursor
<Up> arrow key returns you to the Main menu.
Selecting Options
Usually the Construct <Up> and <Down> arrow keys are used
to select options for the lowest-level menu items. If another
key is required (for example, the
<Address>/<Preset> key), a
message on the LCD display appears.
For example, select
;

from the Main menu and press the
Cursor <Down> arrow key. The LCD display appears as
shown below:
Change the value for Device ID using the Construct <Up> and
<Down> arrow keys. When you are done, press the Cursor
<Up> arrow key or the <Menu> key.
Note The right-pointing arrow on the

3 
menu
option indicates there are more menu options than
will fit on one screen. Keep pressing the Cursor
<Right> arrow key to display more options.


, 
 ,3 ,

-  /


E7  7 )  
)

3  ,
 7A5