High End Systems High End LCD Controller for Studio Color - Manual (Page 154)

6-24 Submasters Studio Color LCD Controller
Selecting a Submaster Mode
There are two submaster modes: Proportional level or
Remote level.
• Proportional Level submasters (typical setting):
Traditional submaster control. The submaster value is
multiplied by the programmed fixture value. For
example, if the recorded dim value for the selected
fixture is at 50 percent and a submaster is at 50 percent,
the fixture will be dimmed at 25 percent.
If there are two or more submasters, the submaster with
the higher setting has control. For example, suppose you
assigned 2 submasters to one fixture. You set submaster
1 at 20 percent dim and submaster 2 at 50 percent dim.
The 50 percent submaster has control because it is the
larger value.
• Remote Level submasters: The device with the higher
level has control. For example, if you program the
fixture for 50 percent dim and the submaster for 60
percent dim, the submaster has control.
1. Select
;

from the Main menu, as shown below:
2. Select


from the Submasters menu, as shown below:
3. Use the Construct <Up> and <Down> arrow keys to make a
selection.
4. Press the <Menu> key to save your selection and exit the
menu system.
)
;?
;:; 
(

-   D ( 
(


;:+ $ 2 . % J K @ 8 +5 ++ +$1
/4
-

))) 
  )