Recording page 3, Recording page 4 – High End Systems High End LCD Controller for Studio Color User Manual
Page 90
4-6
Programming Guided Tour
Studio Color LCD Controller
10. Use the joystick to position the beam in a different place of
your choosing.
11. Press the
<Record>
key to save page 2.
Recording Page 3
1.
Press the
<Select>
key; it flashes.
2.
Press the Page
<Up>
arrow key to select page 3.
3.
Press
<Record>
to complete the page copy.
4.
The controller is now set for memory 1, page 3. Press the
<Select>
key; it flashes.
5.
Press the
<Address>
keys of the fixtures you want to program.
6.
Press the
<Gate>
key, then use the Construct
<Up>
and
<Down>
arrow keys to select
/
.
7.
Press the
<Color>
key and select a different color of your
choice.
8.
Use the joystick to position the beam in a different place of
your choosing.
9.
Press the
<Record>
key to save page 3.
Recording Page 4
Use the same procedure as for recording page 3, making sure
you do all of the following:
1.
Select a value of
%5
for the Delay construct.
2.
Position the beam in a different place than in page 3.
3.
Press
<Record>
when you’re finished.