High End Systems High End LCD Controller for Studio Color - Manual (Page 93)

Studio Color LCD Controller Programming Guided Tour 4-9
4
3. Press the numbered Preset key where you want to record the
preset. For example, to record preset number 1, press the
<1>
key.
Note The Studio Color LCD controller supports up to 1024
presets from the front panel through the use of preset
banking. In this simple procedure you do not need to
use it, but if you would like to learn more, see the
section titled “Preset Programming” on page 4-19.
4. Press <Record> . You are finished recording the preset. See
the section titled “Preset Playback” on page 4-23 for details
about preset playback.
Steps 5—7 demonstrate the loop as a preset.
5. Press the <Auto> key to turn OFF the Auto LED.
6. Press the Preset key of any preset you have not recorded yet.
All Preset LEDs should now be OFF. The page that was
active in Step 5 should still be playing back.
7. Press the key of the preset you recorded in this section. Its
Preset LED comes ON, the Auto LED also comes ON and
your loop starts playing back.