High End Systems High End LCD Controller for Studio Color - Manual (Page 207)

Studio Color LCD Controller Glossary G-11
• The end-to-end cable span (the total length of all cables)
on any link exceeds 500 ft. (153 m).
See also “Link”.
Show Control
A protocol (language) that allows a variety of different types
of devices to be controlled from a central source, such as a
lighting console. Typically, a show control protocol will
allow you to set up cue lists on a lighting console that play
back pages or presets on any controller connected to it.
Show control protocols differ from the DMX 512 protocol in
that DMX 512 is typically used to control devices such as
lighting fixtures.
The two types of show control protocols covered in this
manual are MIDI Show Control (MSC) and Lightwave Show
Control (LSC). See Chapter 5 for more information.
Shutter
The Studio Color fixture has a mechanical shutter that is used
to black the fixture out quickly as well as for strobing using
the Gate construct.
See also “Dim” and “Gate”.
Slave
A slave or slaved controller accepts all of its playback
commands from the master controller. All programming is
done on the slaved controller, however.
See also “Master”.
SRAM
Static Random Access Memory. The type of memory used
for backup and restore functions using a RAM card.
See also “RAM card”.