High End Systems High End LCD Controller for Studio Color - Manual (Page 167)

Studio Color LCD Controller RAM Card: Memory 7-5
7
2. Press the <Menu> key to enter the menu system.
3. Use the Cursor <Right> and <Left> arrow keys to select
?

from the Main menu, as shown below:
4. Press the Cursor <Down> arrow key to view the possible
selections, then use the Cursor <Right> and <Left> arrow keys
to select

 ,

as shown below:
If the message
L-  /

M
does not appear on the
LCD display, see the explanation below:
• If there is no card in the RAM card slot, or if the RAM
card is not fully inserted, the message appears:
L
 

 
M
Fully insert a RAM card into the slot (but
do not force it into the slot—turn it over if you feel
resistance); the LCD display message changes to:
L- 
 /

M
• If the RAM card’s write-protect switch is turned on, the
message appears:
L
 ) M
Unlock the RAM card
as shown in “RAM Card: Write-Protection” on page
7-12.
5. Press the <Record> key.
The LCD display then appears as shown below:
) ? H-  
  

-   D ()


, 
 , 3 ,

-  /




, 
 , 3 ,

 N  /A
<;0 :A
)