High End Systems High End LCD Controller for Studio Color - Manual (Page 97)

Studio Color LCD Controller Page Copy 4-13
4
Page Copy
Use page copy to copy the entire contents of a programmed
page to any other page in any other memory. This is useful
for creating additional pages that contain only slight changes,
such as movement changes or single-parameter changes.
Before continuing, make sure your controller is ready for
programming as shown in Figure 4-1 on page 4-3. Also,
make sure you have programmed at least one page.
1. Select the page (source) that you want to copy from using the
Page
<Up> and <Down> arrow keys.
2. Press the <Select> key. The LCD display appears as shown
below:

3. Select the destination memory and page you want to copy the
contents of the current page to:
• Press the Cursor <Up> and <Down> arrow keys to change
the memory number.
• Press the Page <Up> and <Down> arrow keys to change
the page number.
When you press the Cursor or Page key for the first time, the
LCD display appears similar to the one shown below:
The LCD display above would copy the contents of memory
1, page 5 to memory 2, page 1.
4. Press the <Record> key to complete the page copy.
;)
 ('
 
 
  *  3-  <
 ;0 :
'

 
# + -# %

# $ -# +
-  /

<;0 :
'