High End Systems High End LCD Controller for Studio Color - Manual (Page 124)

5-10 Selecting MSC or LSC Studio Color LCD Controller
If you are continuing from the previous section, begin with Step 3.
1. Enter the menu system by pressing the <Menu> key.
2. Select
;

from the Main menu, as shown below:
3. Press the Cursor <Down> arrow key. The LCD display
appears as shown below:
4. The LCD display above indicates the controller is currently
set for the default ID of 0.
5. Use the Construct <Up> and <Down> arrow keys to change the
value of the
  7
. Values range from 1 to 223 for LSC
and 0 to 126 for MSC.
• In LSC, ID 0 (zero) means that the device responds to
any ID.
• MSC uses device ID 127 to tell a device to respond to
any signal.
6. Press the Cursor <Right> and <Left> arrow keys to select
another menu item, or press the Cursor <Up> arrow key to
return to the Main menu.
7. If you selected MIDI Show Control, you must power cycle the
controller. Turn the power OFF then back ON.
) 
 
 ;:-(

-   D ( 
(
 
E7 G7 G)  
)

3  ,
 7A 5