High End Systems High End LCD Controller for Studio Color - Manual (Page 77)

Studio Color LCD Controller Using the Construct Keys 3-15
3
Dim Key
Use this key to set the beam intensity level for all selected
fixture numbers, from 0 (full dark) to 99 (full bright).
Note The transition time of this construct is set using the
XFade construct.
Color Key
Use this key to set the following:
• Positions 1 through 6 on the color wheel.
• Forward/reverse wheel spin speeds from 1 (slowest)
through 16 (fastest).
• Cycle speeds from 1 (slowest) through 16 (fastest). This
option results in smoothly-crossfaded color combinations
(never white) using the fixture’s subtractive color mixing
system. If you have selected multiple fixtures, all color
changes are synchronized.
• Random speeds from 1 (slowest) through 16 (fastest).
This option results in rapid, “snap” color changes (never
white) using the fixture’s subtractive color mixing
system. If you have selected multiple fixtures, color
changes between fixtures are not synchronized.
• Continuously-variable color combinations on the fixed
color wheel. You can use the Construct
<Up> and
<Down> arrow keys to select full positions, half-color
combinations and variations in between.
For example, the sample display below selects color
wheel position 4 (magenta) because the number
.
is in
the center of the displayed numbers:
*
 /0/   
   ,
/0/# 
  123...3%4-#'