High End Systems High End LCD Controller for Studio Color - Manual (Page 173)

Studio Color LCD Controller RAM Card: O/S 7-11
7
7. Press the <Erase> key again to continue, or press the <Select>
key to cancel. If you press the <Erase> key, the LCD display
appears as shown below:
Caution Do not turn controller power off while the
RAM card is transferring information. If
you want to repeat the operation, wait
until it is completed and then turn the
controller’s power off.
8. When the copying is finished the LCD display appears as
shown below:
9. Turn the controller OFF, remove the RAM card and put it in a
safe place.
10. Turn power back ON to continue with the updated operating
system.
11. Write-protect the RAM card as shown in the next section.

 *
()
/
/!/:7

F
 *


)
/
!/:


F
 )
: D((<


<
D