High End Systems High End LCD Controller for Studio Color - Manual (Page 136)

6-6 Address Parameter Copy Studio Color LCD Controller
Edit/Copy
The Edit/Copy feature has two options:
• “Share all Constructs until selected” (the default):
Copies all of a fixture’s construct parameters to the
fixture(s) you have selected to “copy to”. You can
override this by pressing one or more Construct key(s) to
copy only those constructs.
• “Don’t share constructs until selected”: You must
select the particular construct(s) you do want to copy by
pressing the appropriate Construct key(s) until the LED
indicator above that key lights. Only the selected
constructs are copied.
1. Select
;

from the Main menu, as shown below:
2. Select

3 
from the Setup menu, as shown below:
3. Press the Construct <Up> and <Down> arrow keys to select an
edit/copy function.
4. Press the <Menu> key to exit the menu system.
5. Now see one of the sections listed below:
• “Copy Parameters to Another Fixture, Same Page” on
page 6-7
• “Copy Parameters From One Page to Another Page” on
page 6-8
) 
 
 ;:-(

-   D ( 
(
 
&  
)
7:3 /- 

))
,
;

)) 


) )