High End Systems High End LCD Controller for Studio Color - Manual (Page 142)

6-12 User Key Macros Studio Color LCD Controller
Erasing a Single User Key
To erase one of the User keys, record a zero-keystroke macro
over the old macro using the instructions in this section.
Note Erasing an individual User key does not return it to its
default definition. However, you can restore all six
User keys to their default definitions as shown in the
section titled “Erasing All User Keys” on page 6-14.
1. Press and hold the User key you wish to erase until

 

appears on the LCD display, then release the key. The
LCD display then appears as shown below:
2. Select
 
from the menu.
3. The selected User key’s LED flashes, indicating you are
recording.
4. Press and hold the same User key until

 
appears on
the LCD display, then release the key.
5. Select
;
  
from the menu.
6. The key stops flashing to indicate you are through recording.
Pressing the User key again displays the following message:
:   
-)



! 0)

 (

-   D 

)

))