High End Systems High End LCD Controller for Studio Color - Manual (Page 128)

5-14 Erasing All Memory Studio Color LCD Controller
Erasing All Memory
The Erase All function provides a quick way to clear all
programming (all unlocked memories, all pages, all presets).
This operation does not affect any locked memories, the
controller’s operating system, User key macros, menu
choices (for example, device ID) or submasters.
Note You may want to temporarily back up the controller
before you perform this operation. For more
information, see Chapter 7.
1. Enter the menu system by pressing the <Menu> key.
2. Use the Cursor <Right> and <Left> arrow keys to select
;

from the Main menu, as shown below:
3. Press the Cursor <Down> arrow key to view Setup options,
then use the Cursor <Right> and <Left> arrow keys to select

 ))
from the Setup menu, as shown below:
4. Press and hold the <Select> key, then press the <Erase> key.
Do not release the <Select> key. The LCD display then
appears as shown below:
5. While still holding the <Select> key, press the <Erase> key
again. The system performs a power-on restart to complete
the operation.
) 
 
 ;:-(

-   D ( 
(
 
& 

3  ; 00
 
,
6);0 :<  ;
 )

<− 

3  ; 00
 
,
;0 :I ;  ( <;0 :
)