High End Systems High End LCD Controller for Studio Color - Manual (Page 32)

1-10 Power Cord Cap Studio Color LCD Controller
Power Cord Cap
If you wish to attach the controller to a 230VAC outlet, you
must replace the molded power cord cap provided with the
controller with another suitable type of power cord cap. The
type of power cord cap you must obtain depends on the
location in which the controller will be used.
Note Because of the wide variety of power cord caps used
worldwide, High End Systems, Inc. cannot make
specific recommendations for the particular power
cord cap you should use. Contact a local authority if
you are unsure which type of power cord cap you
need.
IMPORTANT The cores in the mains lead are colored in
accordance with the following code:
• green and yellow: earth
• blue: neutral
• brown: live
Important Power Cord Cap Information - U.K.
Only
Since the colors of the cores in the mains lead of this
equipment may not correspond with the colored markings
identifying the terminals in your plug, proceed as follows:
• The core which is colored green and yellow must be
connected to the terminal in the plug which is marked
with the letter “E” or by the earth symbol
, or colored
green or green and yellow.
• The core which is colored blue must be connected to the
terminal which is marked with the letter “N” or colored
black.