High End Systems High End LCD Controller for Studio Color - Manual (Page 37)

Studio Color LCD Controller Rear Panel Descriptions 2-3
2
MIDI In/Out ports: Where MIDI signals enter and exit the
controller using standard MIDI connections. The controller
supports the MIDI Show Control “GO” command. For more
information, see the section titled “MIDI In and Out Ports”
on page 2-22.
Master/Slave ports: Ports for interconnecting master and
slave controllers. Use the master/slave feature to expand the
system to more than 8 unique fixtures. For more information,
see the section titled “Master and Slave Controllers” on page
2-20.
Analog inputs: Locking 8-pin DIN connectors that enable
remote recall of pages or presets using an analog controller,
or that allow an analog controller to act as a submaster. For
more information, see the section titled “Other Connectors”
on page 2-23.
Remote Enable port: Enable/disable the controller from a
remote location. For more information, see “Remote Enable”
on page 6-30.
Stereo Audio Input: Use a stereo source to trigger audio
effects, such as audio advance, color, and dim modulate. The
sensitivity of the audio effects is controlled from the front
panel of the controller using the Audio knob. For more
information, see the section titled “Audio Input Playback” on
page 6-27.