FARGO electronic C16 - Manual (Page 126)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C16 Card Printer Service Manual (Rev. 5.0) 117
Using the Overlay/Print Area tab
Use this option to control where the overlay (O) panel and/or the print area appear on a card.
(Note: This option is helpful if, for example, you would like to omit or block out the overlay or
printing around a card's smart chip or Magnetic Stripe.)
• By default, this option is set to print and overlay the entire card.
• To customize the overlay and/or print area, select one of the options listed under
Overlay/Print Area.