FARGO electronic C16 - Manual (Page 170)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C16 Card Printer Service Manual (Rev. 5.0) 161
Reviewing the Main Print Board Connections
Main Print Board (A000281) Location
Lid Sensor Assembly (830150); 2-Pin Connector. J4
Card Feed Assembly (830145); 4-Pin/2-Wire Connector. J9
Left Card Sensor Assembly (830135); 5-Pin/4-Wire Connector. J8
Ribbon ID Sensor Board Assembly (763173-2) 3-Pin/3-Wire Connector. J10
Headlift Motor Assembly (830143); 4-Pin/2-Wire Connector. J15
Magnetic Head Assembly (830190 or 830191) 10-Pin/10-Wire Connector. J18
Slotted Sensor Mount (Assembly 830149) 5-Pin/4-Wire Connector. J7
LED Board Assembly (830133) and Ribbon Sensor Board Assembly (830151);
4-Pin/2-Pin Connector each. J12
Printhead Harness Assembly (830162-00); 3-Pin/2-Wire (Headlift Sensor
Switch). J6
Card Feed Assembly (830145); 3-Pin/2-Wire Connector. J16
Printhead Harness Assembly (830162-00); 14-Pin Data Cable Connector. J13
Printhead Harness Assembly (830162-00); 2-Pin Connector, Cooling Fan. J3
Front Panel Board Assembly (830164); 6-Pin Connector. J2
Reviewing the Power Board Connections
Power Board (A000284) Location
Printhead Power J11
Stepper Motor J17
Ribbon Drive Motor J14