FARGO electronic C16 - Manual (Page 93)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C16 Card Printer Service Manual (Rev. 5.0) 84
Using the Card tab
Adjusting the Card Size Option
Step Description
1 Click on the inches or mm option to choose the desired unit of measurement.
(Note #1: When designing a card format, always set the card size or page
size within the card design program to the exact dimensions of a CR-80 card.)
(Note #2: The Card Size indicates that the Printer accepts standard, "credit
card" size CR-80 (ISO ID-1) cards. The dimensions of the total print area for
this card size appear in the Print Width and Print Length boxes.)