FARGO electronic C16 - Manual (Page 83)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C16 Card Printer Service Manual (Rev. 5.0) 74
Adjusting for CR-79 Adhesive Back Cards
The Printer is designed to print on both standard CR-80 ("credit card") sized cards and CR-
79 sized card sizes.
• The CR-79 cards are slightly smaller than CR-80 sized cards with a thickness of 20 mil
(.020"/.5mm).
• The CR-79 card size relates to the adhesive back cards (used in applications where they
are printed and applied to thicker proximity cards).
Step Procedure
1 If the Printer does not have a Magnetic Stripe encoder:
a. Do not adjust for the different card sizes.
b. Disregard this procedure. (Note: The Printer's factory setting will
accommodate both.)
2 If the Printer does include a Magnetic Stripe encoder and you are printing with
CR-79 sized cards:
a. Adjust for the different card sizes.
b. Refer to the next two pages to make card size adjustments to the Printer's
Internal Card Guide.
• The Internal Card Guide holds the card in position as it feeds through the
Printer.
• This guide is factory-set to optimize both printing and magnetic Encoding
on CR-80 sized cards. See the next page.)