FARGO electronic C16 - Manual (Page 185)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C16 Card Printer Service Manual (Rev. 5.0) 176
Replacing the Magnetic Head Assembly (High-Coercivity: 810182 or Low-
Coercivity: 810182) (continued)
Steps Procedure
15 Use the thumb and index fingers of both hands to carefully pry the Print Circuit
Board from the Power Circuit Board.
16 Disconnect the cable connector from J18 on the Print Circuit Board.
17 Place the Printer on the input end.
18 Work the cable connector through the opening to the Access Plate area.
19 Remove the Magnetic Head Assembly from the Printer.