Cleaning the platen roller – FARGO electronic C16 User Manual
Page 162
RESTRICTED USE ONLY
Fargo Electronics, Inc.
Persona C16 Card Printer Service Manual (Rev. 5.0)
153
Cleaning the Platen Roller
Clean the Printer's Platen Roller approximately every 250 prints or during every ribbon
change. (Note: This helps prevent jams and maintain the best print quality. Perform this
procedure if the roller is visibly dirty.)
Step Procedure
1
Leave the power ON and open the Printer's Top Cover.
2
Remove the Print Ribbon.
3
Locate the Platen Roller.
4
Use a Cleaning Pad from the Printer Cleaning Kit to wipe the roller clean. (Note:
Press the On/Cancel button and Pause/Resume button to move the roller back
and forth while cleaning.)
5
After the roller is clean and completely dry, replace the printing supplies and
close the Printer.
Platen Roller