FARGO electronic C16 - Manual (Page 183)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C16 Card Printer Service Manual (Rev. 5.0) 174
Securing the current Stepper Motor Bracket and Fastener for
increased belt tension
The purpose of this Technical Update (dated 12/19/2002) was to describe improvements
relating to the main C16 Chassis (D810024) for the Persona C16 Card Printers. No action is
required. This is for your information only. ECO C03694 has been released.
• Improvement No. 2 (C16 Chassis): Made improvement by adding the 3.2mm x 7mm x
.5mm Washer (140040; 1x) to the main C16 Chassis (D810024) for the C16 Card
Printers. (Technician Note: This ensures that the current Stepper Motor Bracket and
Fastener are secured for increased belt tension.)