FARGO electronic C16 - Manual (Page 163)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C16 Card Printer Service Manual (Rev. 5.0) 154
Cleaning the Printer's Exterior
The Printer has a durable casing that should retain its luster and appearance for many years.
Clean it only with a Cleaning Pad from the Printer Cleaning Kit.
Caution: Do not use cleaning solvents of any kind or spray the cabinet with a
cleaner.
Cleaning the Printer's Interior
Dust and other particles may accumulate inside the Printer with continued usage.
• These particles are attracted to the print ribbon or blank card by static (produced during
printing).
• These particles can contaminate the printed card and cause spots or speckles to appear.
Periodically, use the following procedure to remove dust and other contaminants:
Step Procedure
1 Open the Printer's top cover.
2 Remove the Print ribbon from the Printer.
3 Use a Cleaning Pad from the Printer Cleaning Kit to wipe out all visible areas
inside the Printer. Remove any debris that may be inside.
Caution: Be extremely careful not to let any alcohol drip inside the
Printer.
4 Re-install the printing supplies and close the Printer.