FARGO electronic C16 - Manual (Page 139)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C16 Card Printer Service Manual (Rev. 5.0) 130
Selecting the VeriMark radio button
Step Procedure
1 Click on either the VeriMark or HoloMark radio button, as shown below. The foil
options are used to control the size of the exclusion area. (Note: When
VeriMark is selected a rectangle-sized area is excluded, HoloMark uses a
square sized area.)
2 Click on the VeriMark radio button (below) for the rectangle-sized area.