Motorola ColdFire MCF5281 User Manual
Page 177
Clock Module
Freescale Semiconductor
9-7
14–12
MFD
Multiplication Factor Divider. Contain the binary value of the divider in the PLL
feedback loop. The MFD[2:0] value is the multiplication factor applied to the reference
frequency. When MFD[2:0] are changed or the PLL is disabled in stop mode, the PLL
loses lock. In 1:1 PLL mode, MFD[2:0] are ignored, and the multiplication factor is one.
Note: In external clock mode, the MFD[2:0] bits have no effect.
11
LOCRE
Loss-of-clock reset enable. Determines how the system handles a loss-of-clock
condition. When the LOCEN bit is clear, LOCRE has no effect. If the LOCS flag in
SYNSR indicates a loss-of-clock condition, setting the LOCRE bit causes an
immediate reset. To prevent an immediate reset, the LOCRE bit must be cleared
before entering stop mode with the PLL disabled.
1 Reset on loss-of-clock
0 No reset on loss-of-clock
Note: In external clock mode, the LOCRE bit has no effect.
10–8
RFD
Reduced frequency divider field. The binary value written to RFD[2:0] is the PLL
frequency divisor. See table in MFD bit description. Changing RFD[2:0] does not affect
the PLL or cause a relock delay. Changes in clock frequency are synchronized to the
next falling edge of the current system clock. To avoid surpassing the allowable system
operating frequency, write to RFD[2:0] only when the LOCK bit is set.
Table 9-4. SYNCR Field Descriptions (continued)
Bit(s)
Name
Description
((
The following table illustrates the system frequency multiplier of the reference
frequency
1
in normal PLL mode.
1
,
where f
sys(max)
is the maximum system frequency for the particular MCF5282
device (66 MHz or 80 MHz).
MFD[2:0]
000
2
(4x)
2
MFD = 000 not valid for f
ref
< 3 MHz
001
(6x)
010
(8x)
(3)
011
(10x)
100
(12x)
101
(14x)
110
(16x)
111
(18x)
RF
D
[2
:0]
000 (
ч
1)
4
6
8
10
12
14
16
18
001 (
ч
2)
3
3
Default value out of reset
2
3
4
5
6
7
8
9
010 (
ч
4)
1
3/2
2
5/2
3
7/2
4
9/2
011 (
ч
8)
1/2
3/4
1
5/4
3/2
7/4
2
9/4
100 (
ч
16)
1/4
3/8
1/2
5/8
3/4
7/8
1
9/8
101 (
ч
32)
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
110 (
ч
64)
1/16
3/32
1/8
5/32
3/16
7/32
1/4
9/32
111 (
ч
128)
1/32
3/64
1/16
5/64
3/32
7/64
1/8
9/64
f
sys
f
ref
2 MFD
2
+
(
)
×
2
RFD
---------------------------------------------- f
ref
2 MFD
2
+
(
)
×
f
sys max
(
)
f
sys
f
sys max
(
)
≤
;
≤
;
=
MCF5282 and MCF5216 ColdFire Microcontroller User’s Manual, Rev. 3