Muratec MFX-2830 - Manual (Page 104)

COPY
Chapter1
COPY Chapter1 ● Basic Copy Features
2-24
Interrupt Copy
If you immediately need to make a copy, you can interrupt the current job to make a copy.
● Interrupting is available during copy scanning, copy printing, and while adjusting settings, such as docu-
ment type and resolution.
● Interrupting is not available during advanced copying or while setting functions.
Operating tips
LTR
LTR
LGL
11x17
DuplexCopy
OFF
Contrast
Auto
Doc.Type
Auto
Zoom
100%
Finishing
No Sort
Others
Copy Ready 001
Set
Memory 100%
1
Press INTERRUPT .
2
If a document remains after
copying, remove it. When copying
using the ADF, press
STOP to dis-
charge the remaining documents.
3
Load the document for the intur-
rupting copy.
4
Make the copy.
The key lamp will illumi-
nate.
Note