Energy save, And energy save mode -25, And energy save mode – Muratec MFX-2830 User Manual

Page 43: Copy, Power switch and

Advertising
background image

1-25

Getting Started

Getting
Started

COPY

Chapter1

COPY

Chapter2

COPY

Chapter3

FAX

Chapter1

FAX

Chapter2

FAX

Chapter3

FAX

Chapter4

Common

Settings

In This

Case...

Appendix

Power Switch and

ENERGY SAVE

ENERGY SAVE

and energy save mode

When the machine has been idle for a predetermined amount of time, the Energy Save mode will
activate to conserve power. The Energy Save mode consists of the “Low Power Mode” and the “Sleep
Mode”.

ENERGY SAVE

is used to activate the Energy Save mode.

Low Power Mode
· When

ENERGY SAVE

is pressed, the touch screen and the various lamps are turned off and the printer enters

the rest state (Low Power Mode) to conserve power.

· If the machine is not used for 15 min, it will automatically enter the Low Power Mode. This value can be

changed in Low Power Mode setting displayed after pressing [Energy Save Mode] in [Management]. (see
page 4-36)

·

ENERGY SAVE

illuminates in green when the machine is in the Low Power Mode.

· When any key or the touch screen is pressed while in the Low Power Mode, the machine will “wake-up” and re-

turn to the normal standby state.

Sleep Mode
· To put the machine in Sleep mode, hold down

ENERGY SAVE

for 3 seconds.

· When the machine remains in the Low Power Mode for 1 hour, it will automatically enter the Sleep Mode. This

value can be changed in the [Sleep Mode Setting] displayed after pressing [Energy Save Mode] in [Man-
agement]
. (see page 4-36)

· When in Sleep Mode, all power is off, but the documents scanned into memory can be transmitted and received

documents can be printed.

The number of reception ring becomes more than the set number in Sleep Mode.

·

ENERGY SAVE

illuminates in red when the machine is in the Sleep Mode.

· When

ENERGY SAVE

is pressed in the Sleep Mode, the machine returns to the normal standby state.

· The time to cancel or start the Energy Save Mode can be set. (For Energy Save Mode Time Setting, see page

4-36.)

The Energy Save Mode will not activate if there is a print error, such as an out-of-paper status or paper jam.

Note

Advertising