Muratec MFX-2830 - Manual (Page 370)

FAX
Chapter4
FAX Chapter4 ● Fax Settings
3-192
Transmission Default Settings
You can set defaults for transmissions. Select the default settings most suited to your usage
conditions.
Default settings establish the status when a document is loaded or RESET is pressed to return to the standby screen.
Note
The default settings are re-established if the machine is left without any operation for a designated period of time. This
period of time can be set. (see page 4-35)
Reference
Setting example
An example of default settings for resolution when sending a fax and how to perform the settings
is given below.
1
Press SETTING .
Enter
Speed Dial
Copy
Functions
User
Install
Group Name
Store Doc
Settings
Management
Scanner
Settings
Settings
Paper
Settings
Fax
Functions
Counter
Select item to edit.
2
Press [Fax Functions].
Enter
Default
Settings Program
One-Touch
Cover Page
Other
Settings
Fax Functions
Select item to edit.
F-Code Box
Batch Tx
Box
Fax
Forward
3
Press [Default Settings].
Enter
Resolution
Normal
Contrast
Normal
Memory Tx
ON
Default Settings
Select item to edit.
TTI
ON
Tx Report
OFF
Cover Page
OFF
4
Press [Resolution].