Muratec MFX-2830 - Manual (Page 380)

Common
Settings
Common Settings for Copy and Fax ● Function Settings
4-2
Macros
● Enter a series of operations in Macros to allow all the entered operations to be performed
by one press of the button.
● Entering the fixed operation is useful when the same copy is made or the same fax is sent
frequently.
● Check and record the operating instructions first for the settings you want to enter, which is helpful for
entering the settings easily and quickly.
● There are six Macros keys. Up to 60 steps of operation can be entered in each key. (One step is equivalent
to one selection or press of a key.)
● When steps are being entered in Macros, the machine will emit a beeping sound and the screen keys
(
COPY , FAX , SCANNER and PRINTER ) will blink. As the number of steps that can be entered near the
limit, the beeps will sound and the keys will blink in shorter intervals.
● “Last job” cannot be entered. RESET or INTERRUPT cannot be entered, either.
Operating tips
Setting up macros
1
Press MACRO .
Enter
Run
Edit Title
Key speed
Normal
Marco
Select item to edit.
Delete Enter/Edit
2
Press [Enter/Edit].
When steps have already
been entered in Macros,
the corresponding list of
steps for that key is dis-
played. In that case, press
[Enter].
Note